How to Prune Cedar Bushes (Step-by-Step)

Pruning cedar bushes keeps them dense, healthy, and shaped the way you want, and it prevents bare, woody gaps from forming at the center. The right time and technique matter: cedars do not regrow from old wood, so every cut you make should leave some green growth behind. Before you start, confirm your plant is a true cedar or an arborvitae (often sold as “cedar”), since the same rules apply to both.

What You’ll Need

  • Bypass pruning shears for branches up to about half an inch thick
  • Loppers for thicker branches
  • Hand saw for the largest limbs
  • Disinfectant (rubbing alcohol or a household bleach solution) to clean blades between plants
  • Work gloves and eye protection
  • Optional: a tarp to collect clippings

Step-by-Step

  1. Choose the right season. Prune in late winter to early spring, just before new growth begins. You can also do light shaping in early summer, but avoid pruning in late summer or fall because new growth won’t harden off before frost.
  2. Inspect the bush first. Walk around it and identify dead, diseased, or broken branches. These can be removed any time of year, but it’s easiest to spot them before the new growth fills in.
  3. Disinfect your tools. Wipe the blades with rubbing alcohol before you start, especially if you’ve pruned other plants recently. This prevents spreading disease from one bush to another.
  4. Remove dead and diseased wood. Cut these branches back to the main trunk or to a healthy side branch. Dead wood is often dry, brittle, and has no green under the bark when you scratch it lightly.
  5. Thin out crowded branches. Look for branches that rub against each other or grow toward the center. Remove the weaker of the two, cutting it back to the point of origin. This improves air circulation and reduces the risk of fungal issues.
  6. Shape the outside, lightly. For most cedars, you only need to trim the tips of branches to maintain a natural, slightly tapered form. Make each cut just above a green side shoot, angling the cut so water runs off. Never cut into the brown, bare wood in the center of the bush—that wood will not sprout again.
  7. Control size gradually. If the bush has outgrown its spot, reduce it by no more than about a third of its height or width in a single year. Cutting back harder than that stresses the plant and can leave permanent bare patches.
  8. Step back and check symmetry. After every few cuts, walk around and view the bush from all sides. It’s easy to over-prune one side without noticing. Aim for a shape that is slightly narrower at the top than the bottom so sunlight reaches the lower branches.
  9. Clean up and dispose of clippings. Rake up all trimmings. If any branches showed signs of disease, do not compost them—bag them and discard with household waste.
  10. Water and mulch after pruning. Give the bush a deep watering to help it recover, and add a fresh layer of mulch around the base (but not touching the trunk) to retain moisture.

Common Mistakes

  • Cutting into old wood. The biggest error is shearing back to bare branches. Cedars and arborvitae only push new growth from green, needle-covered wood. Once you cut into the brown center, that spot stays bare forever.
  • Pruning at the wrong time. Late summer or fall pruning encourages tender new growth that winter will kill, leaving the bush damaged and unsightly.
  • Shearing too heavily. Using hedge trimmers to remove large amounts of foliage each year creates a dense outer shell that blocks light from the interior, causing the inside to die out and become hollow.
  • Ignoring disease. Not cleaning your tools between bushes can spread fungal infections like cedar-apple rust or tip blight to healthy plants.
  • Topping the bush. Cutting off the top leader (the main upward-growing stem) ruins the natural shape and encourages multiple weak leaders that can split under snow or wind.

Tips

  • Prune on a dry day to reduce the spread of fungal spores. Wet conditions make disease transmission more likely.
  • For a formal hedge, prune lightly several times during the growing season rather than one hard cut. This keeps the surface green and dense.
  • If you want a more natural, open look, prioritize thinning cuts over shearing. Remove whole branches at their base instead of trimming every tip.
  • Young cedars need very little pruning—just removing dead or damaged growth. Let them establish their shape for the first few years.
  • Use the “green tip” rule: always cut above a point where you can see small green needles on the remaining branch. That guarantees regrowth.
  • If you’re unsure how much to remove, start with less. You can always take more off, but you can’t put it back.

Troubleshooting

I cut too deep and now there’s a bare spot. Unfortunately, that spot will not regrow. Your best option is to let neighboring branches grow over it, which can take a couple of seasons. You can also train an adjacent branch by gently bending it toward the gap and tying it loosely in place. Avoid cutting that area again.

The bush looks brown or yellow after pruning. This is often a sign of stress from over-pruning or from pruning during hot, dry weather. Water deeply and regularly for the next few weeks. Do not fertilize—that adds more stress. If the browning spreads, check for pests or disease and consult a local nursery.

Branches are dying back at the tips. This could be a fungal issue, especially if you pruned in wet weather. Remove the affected branches, disinfect your tools, and dispose of the clippings. Improve air circulation by thinning the interior slightly. If the problem persists, take a sample to a local extension office for identification.

The bush is too large and I cut it back hard—now what? Hard pruning on a cedar often results in permanent bare patches. Protect the remaining green growth, water well, and be patient. If the bush is severely overgrown, it may be wiser to replace it rather than fight it for years.

My hedge looks ragged after shearing. Next time, use hand pruners for the larger cuts and reserve shears for light tip-trimming only. Also, taper the hedge so the base is wider than the top—this prevents the lower branches from being shaded out and going bare.

Frequently Asked Questions

When is the absolute best time to prune cedar bushes? Late winter to early spring, just before new growth starts. This gives the plant the whole growing season to recover and fill in. Light touch-ups can be done in early summer.

Can I prune cedar bushes in the fall? It’s not recommended. Fall pruning stimulates new growth that won’t harden before frost, leaving the bush vulnerable to winter damage. Save major pruning for spring.

How much can I cut back a cedar bush without killing it? Never cut into the brown, bare wood at the center—that wood won’t sprout again. You can safely remove up to about a third of the green growth in one year, but no more.

Will cedar branches grow back if I cut them all the way to the trunk? No. Cedars and arborvitae do not regrow from old wood. A branch cut back to the trunk is gone for good, leaving a permanent gap.

Do I need to seal the cuts after pruning? No. Modern research shows that pruning sealants can trap moisture and promote decay. Let the cuts heal naturally in the air.

Can I use hedge trimmers on cedar bushes? Yes, but only for light tip-trimming on formal hedges. For overall health, use hand pruners to make selective cuts that preserve the natural shape and keep the interior green.