How to Make Resin Paper Mache Paste

Resin paper mache paste creates a hard, water-resistant, and durable finish that is perfect for sculptures, jewelry, and decorative objects. Unlike traditional flour-based paste, this recipe uses a two-part resin and paper pulp mixture that cures to a smooth, glossy surface. You’ll need to work in a well-ventilated area and wear gloves, as the resin is an epoxy that can irritate skin.

What You’ll Need

  • Epoxy resin (two-part: resin and hardener)
  • Paper (torn into small pieces, about 1-2 inches square)
  • Water
  • Container for mixing (disposable or silicone)
  • Stirring sticks (wooden or plastic)
  • Gloves (nitrile or latex)
  • Safety glasses
  • Drop cloth or newspaper to protect your work surface
  • Optional: mold or armature to shape your project

Step-by-Step

  1. Prepare your workspace. Lay down a drop cloth or newspaper. Ensure the room is well-ventilated—open a window or use a fan. Put on gloves and safety glasses.
  2. Tear the paper. Use plain newsprint, tissue paper, or paper towels. Avoid glossy or coated paper. Tear into small pieces, about 1-2 inches square. The smaller the pieces, the smoother the final surface.
  3. Soak the paper. Place the torn paper in a container and cover with warm water. Let it soak for at least a few hours, or overnight, until the paper is soft and mushy. This step is essential for blending the paper with the resin.
  4. Drain and squeeze. After soaking, drain the excess water. Squeeze the paper to remove as much water as possible—you want it damp, not dripping. Set aside.
  5. Mix the resin. Follow the manufacturer’s instructions for your specific epoxy resin. Typically, you mix equal parts resin and hardener in a disposable cup. Stir slowly and thoroughly for at least 2-3 minutes, scraping the sides and bottom. The mixture should become clear.
  6. Combine resin and paper. Add the damp paper pulp to the mixed resin. Use a stir stick to mix them together. The resin will saturate the paper. Aim for a paste-like consistency—thick enough to hold shape but not so stiff that it crumbles. If it’s too dry, add a few drops of resin; if too runny, add more paper pulp.
  7. Shape your project. You can press the paste into a mold, sculpt it by hand, or apply it over an armature (like a wire frame or a balloon). Work quickly, as the resin will begin to cure and harden within a few minutes to a half-hour, depending on the product.
  8. Smooth the surface. Use a wet finger or a soft brush dipped in resin to smooth out any rough edges or fingerprints. This is easier to do while the paste is still pliable.
  9. Let it cure. Place your project in a dust-free area. Allow it to cure completely. Curing time varies—check the resin label, but it can take anywhere from several hours to a full day. Do not disturb it during this time.
  10. Sand and finish (optional). Once cured, you can sand the surface with fine-grit sandpaper for a smoother finish. You can also paint it with acrylics or apply a clear coat for extra gloss.

Common Mistakes

  • Using too much water. If the paper is too wet, the resin won’t saturate properly, and the paste will be weak and take longer to cure.
  • Not mixing resin thoroughly. Improper mixing leads to sticky or soft spots that never harden.
  • Working in a poorly ventilated area. Epoxy fumes can be harmful. Always work with good airflow.
  • Adding paper to resin too quickly. The resin can start to cure before you’ve shaped your project. Work in small batches if needed.
  • Skipping the soak. Dry paper won’t blend with resin; it will just float in the mixture.

Tips

  • Use a silicone mold or a surface you don’t mind ruining, as resin is hard to remove once cured.
  • If you want a smoother texture, use tissue paper or paper towels instead of newsprint.
  • To speed up curing, place your project in a warm (not hot) area, but avoid direct heat sources.
  • For a colored paste, add a few drops of resin-safe pigment or acrylic paint to the resin before mixing with paper.
  • Keep a bowl of rubbing alcohol nearby to clean your tools and your hands if you get resin on them.

Troubleshooting

  • Paste is too runny. Add more dry paper pulp or let the mixture sit for a few minutes to thicken. If it remains runny, you may have added too much resin—start over with a smaller batch.
  • Paste is too dry and crumbly. Add a small amount of mixed resin (not water) and stir thoroughly.
  • Surface is sticky after curing. This usually means the resin wasn’t mixed well. You can try wiping with alcohol, but if it remains tacky, you may need to apply a fresh coat of properly mixed resin.
  • Bubbles appear. Gently blow on the surface or use a heat gun (low heat) to pop bubbles right after shaping. Avoid over-stirring, which introduces air.
  • Project is soft after curing. The resin-to-paper ratio was too low. You can reinforce by brushing a thin coat of pure resin over the cured piece.

Frequently Asked Questions

  • Can I use any type of paper? Yes, but avoid glossy or coated paper because it won’t absorb resin well. Newsprint, tissue paper, and paper towels work best.
  • Is resin paper mache paste food-safe? No, it is not food-safe. Use it only for decorative or non-food items.
  • How long does the paste take to cure? It depends on the resin. Check the label—curing can take a few hours to a full day. The paste itself will start to set within minutes, so work quickly.
  • Can I paint over the cured resin paper mache? Yes, you can paint it with acrylics or spray paint. Sand lightly first for better adhesion.
  • Do I need to use a mold? No, you can sculpt by hand or use an armature. A mold just makes shaping easier.
  • Can I make the paste without resin? Yes, but it won’t be waterproof or as durable. Traditional paper mache uses flour or glue, but it remains porous and less strong.