Paper Mache Globe: How to Make One Step by Step

A paper mache globe is a handmade sphere covered in layers of paper strips and paste, usually built over a round base like a balloon. You can make one at home with simple materials, and it doubles as a craft project and a working geography model.

What Paper Mache Globes Are Made Of

The classic recipe uses two ingredients: torn paper and a paste. Newspapers work best because the thin, absorbent sheets conform easily to curved surfaces. The paste is typically flour and water, cooked or raw, or a store-bought craft adhesive mixed with water. Some crafters add a pinch of salt to the flour paste to discourage mold while the globe dries.

The base is usually a round balloon, which is inflated to the desired size and popped or deflated once the paper shell is dry. Other options include a polystyrene foam ball, a wire armature, or a cardboard sphere from a craft store. The choice affects how permanent the globe is and whether you can remove the base.

How to Build a Paper Mache Globe

The process takes a few days because each layer needs to dry completely before the next goes on. Here is the basic sequence:

  • Blow up a balloon to the size you want, and tie it off.
  • Tear newspaper into strips about an inch wide and a few inches long.
  • Mix paste in a bowl—about one part flour to two parts water, stirred until smooth.
  • Dip each strip into the paste, wipe off the excess with your fingers, and lay it on the balloon.
  • Apply three to five layers, alternating the direction of the strips for strength.
  • Let the globe dry for at least a day, then add more layers if needed.
  • Once fully dry, pop the balloon and pull it out through the hole.

For a smoother surface, sand the dried shell lightly with fine sandpaper before painting. If you want a removable globe, leave the balloon inside and attach a stand later, but most people pop it for a lighter, sturdier result.

How to Turn the Sphere Into a Globe

After the shell is dry, you need to mark the continents and oceans. The easiest method is to print a world map template, cut out the landmasses, and trace them onto the sphere. You can also freehand the shapes, but that takes practice.

Paint the oceans first with a base coat of blue acrylic paint. Once that dries, draw or transfer the continent outlines with a pencil. Fill in the land with green, tan, or a mix of colors for terrain. Add labels for countries, capitals, or oceans with a fine-tip marker or paint pen.

For a more accurate result, use a globe projection that accounts for the sphere’s curvature. Some crafters wrap a printed map around the sphere and align the equator and poles carefully. This is fiddly but gives a professional look.

Common Problems and Fixes

Several issues come up frequently when making a paper mache globe:

  • Lumpy surface: Use thinner strips and smooth each one down firmly. Sanding after drying helps a lot.
  • Mold: Add salt to the paste and dry the globe in a warm, ventilated area. If mold appears, discard the project and start over.
  • Balloon deflates early: Make sure the balloon is fully tied and not overinflated. A slow leak will ruin the shape.
  • Paper wrinkles: Tear strips instead of cutting them—torn edges lie flatter.
  • Globe is too light or fragile: Add more layers or use a stronger paper like brown kraft paper for the final layer.

If the globe collapses when you pop the balloon, the shell was too thin. Add several more layers next time and let each one dry completely.

Alternatives to the Balloon Method

Balloons are the most common base, but not the only option. A foam ball gives a solid, permanent core that you can leave inside. It is easier to paint on because the surface is smooth, but you cannot remove the base, so the globe is heavier.

A wire armature lets you build a larger globe, but it requires more skill to shape. Cardboard globes from craft stores come pre-formed and are ideal if you want to skip the layering step entirely. These are often sold in a few sizes and are ready to paint.

For a quick version, some people cover a round plastic ball or a children’s beach ball. The advantage is that you can deflate and reuse the base, but the paper shell may not separate cleanly.

Cost and Materials

Most supplies are already in a typical home. Newspaper, flour, water, and a balloon cost almost nothing. Acrylic paint and brushes are the main expense, and a small set covers a globe project. If you buy a foam ball or a cardboard sphere, the cost goes up a bit, but it is still a low-budget craft compared to a store-bought globe.

You will also need a pencil, scissors, and a container for the paste. A paintbrush for the paste helps spread it evenly, though your fingers work fine. For labeling, a fine-tip permanent marker is useful.

Safety and Cleanup

Flour paste is non-toxic, but it can attract insects if left out. Keep the paste covered when not in use and wash your hands after handling it. If you use a commercial adhesive, check the label for safety instructions and ventilation needs.

Acrylic paint is water-based and cleans up with soap and water, but it can stain clothing. Wear an apron or old clothes. Sanding the dry shell creates fine dust, so do it outdoors or wear a dust mask.

Do not let small children play with the paste or paint unsupervised. The balloon, once popped, is a choking hazard for toddlers. Keep the project out of reach until it is fully finished.

Frequently Asked Questions

How long does a paper mache globe take to dry? Each layer takes about a day to dry in normal room conditions. A globe with five layers needs several days total. Drying in a warm, dry room speeds things up, but avoid direct heat that can crack the paper.

Can I use a balloon as the base and keep it inside? Yes, but the balloon will eventually deflate and wrinkle inside the shell. Most people pop it after drying. If you want a permanent base, use a foam ball instead.

What is the best paste recipe? A simple mix of one part flour to two parts water works well. Add a teaspoon of salt per cup of paste to prevent mold. Some crafters prefer a glue-and-water mix because it dries clearer and smoother.

How do I make the continents look accurate? Use a printed map template and trace it onto the sphere. Align the equator and poles carefully. For a more precise result, project the map using an equal-area projection designed for spheres.

Is paper mache strong enough for a school project? Yes, with enough layers. Five layers of newspaper create a sturdy shell that can be handled and displayed. Adding a final layer of brown paper or a coat of varnish makes it more durable.

Can I paint over the newspaper text? Yes, but you may need a primer or several coats of paint. A white gesso base coat covers the print well and gives a smooth surface for your map colors.