Inspect Wood Burning Fireplace: What to Check

To inspect a wood burning fireplace, you should check the firebox, damper, chimney, and surrounding clearances for damage, creosote buildup, and proper operation. A thorough inspection also includes the hearth, the flue liner, and the exterior of the chimney, and it is best done annually by a certified professional, though you can perform a basic visual check yourself.

Why Regular Inspection Matters

Wood burning fireplaces create intense heat and produce creosote, a highly flammable byproduct of burning wood. Creosote accumulates on the inner walls of the chimney and can ignite, causing a chimney fire that can spread to the rest of the house. Regular inspections catch creosote buildup, cracks in the flue, and other hazards before they become dangerous.

Beyond safety, an inspection ensures the fireplace operates efficiently. A damaged damper or a blocked chimney reduces draft, causing smoke to spill into the living space. Early detection of small issues saves you from costly repairs later.

What to Check Before Each Use

Before lighting a fire, do a quick visual inspection. Look up into the firebox and the chimney with a flashlight to see if there is any obvious blockage, such as a bird nest or fallen debris. Open the damper fully and confirm it stays open. Check for any cracks in the firebrick or mortar that could allow heat to reach the surrounding wood framing.

Also, verify that the area around the fireplace is clear. Combustible materials, like newspapers, furniture, or decorations, should be kept at a safe distance—typically a few feet from the opening. Make sure the hearth is intact and extends far enough to catch embers.

Signs of Damage You Can Spot Yourself

Some damage is visible without special tools. Look for:

  • Cracks or gaps in the firebrick or mortar joints inside the firebox.
  • A damper that is rusted, stuck, or does not seal tightly.
  • White or brown staining on the exterior of the chimney, which may indicate moisture problems.
  • Missing or deteriorated mortar on the chimney crown (the top cap).
  • Spalling brick—flaking or chipping on the chimney exterior.

If you notice any of these issues, do not use the fireplace until a professional has assessed it.

The Professional Inspection Process

A certified chimney sweep follows a standard level of inspection. The most common is a level one inspection, which covers the readily accessible parts of the fireplace and chimney. The professional will check the interior of the firebox, the damper, the smoke chamber, and the flue for creosote buildup, cracks, and blockages.

For a more thorough evaluation, a level two inspection includes video scanning of the entire flue. This is recommended when buying a home, after a chimney fire, or if you are making changes to the fireplace. A level three inspection involves removing parts of the chimney or fireplace structure to investigate hidden damage—this is rare and only done when a serious issue is suspected.

Always hire a professional who is certified by a recognized industry organization, such as the Chimney Safety Institute of America. Ask for references and proof of insurance.

Creosote: The Main Reason to Inspect

Creosote forms when wood burns incompletely, and the unburned vapors condense on the cooler chimney walls. It comes in three forms: a flaky soot, a tar-like glaze, and a hard, shiny deposit. The first two are easier to remove; the glazed form is highly flammable and difficult to clean, often requiring special tools or chemical treatments.

The amount of creosote depends on how you burn. Burning wet or unseasoned wood creates more creosote, as does burning at low temperatures with a smoldering fire. To reduce creosote, burn only seasoned hardwood, keep the fire hot enough to produce a steady draft, and never leave a fire smoldering overnight.

When to Have a Professional Inspection

The National Fire Protection Association recommends that chimneys, fireplaces, and vents be inspected at least once a year. This is true even if you use the fireplace infrequently, because animals can nest, and moisture can cause deterioration. If you use your fireplace regularly—more than a few times a week—consider an inspection twice a year.

Also schedule an inspection after a chimney fire, after a lightning strike, or if you notice a change in how the fireplace draws. If you smell a strong, smoky odor coming from the fireplace when it is not in use, that can signal a creosote problem.

Common Misconceptions

One common myth is that you can clean your chimney by burning a chemical log. While these logs can help reduce creosote, they do not replace a physical cleaning. Another misconception is that a fireplace is safe if it looks fine from the outside. Many defects, such as a cracked flue liner, are hidden inside the chimney.

Some homeowners believe that a fireplace is a good primary heat source. In reality, most wood burning fireplaces are inefficient for heating, drawing warm room air up the chimney. They are better used for occasional ambiance, not as a main heating system.

Cost and Frequency of Inspections

The cost of a professional inspection varies widely depending on your location, the type of chimney, and the level of inspection. A basic level one inspection typically costs a modest fee, while a level two with video scanning costs more. Cleaning, if needed, is usually an additional charge. It is wise to get quotes from several certified professionals before booking.

For most homeowners, an annual inspection is sufficient. If you burn wood every day during the winter, you may need a mid-season check. Remember that the cost of an inspection is small compared to the potential cost of a house fire.

Safety Tips for Using Your Fireplace

Even with a clean inspection, practice safe habits:

  • Never leave a fire unattended.
  • Use a metal mesh screen or glass door to contain sparks.
  • Keep a fire extinguisher nearby and ensure smoke detectors are working.
  • Burn only seasoned wood—never trash, cardboard, or treated lumber, which can release toxic fumes.
  • Allow ashes to cool completely before disposing of them in a metal container.

If you smell smoke inside the house, or if the fire seems to struggle to draw, stop using the fireplace and have it checked.

Frequently Asked Questions

How often should I have my wood burning fireplace inspected?

At least once a year, even if you use it rarely. The National Fire Protection Association recommends an annual inspection of chimneys, fireplaces, and vents. If you use the fireplace frequently, consider twice a year.

Can I inspect my fireplace myself?

You can do a basic visual check for cracks, blockages, and creosote, but a professional inspection is necessary to see inside the flue and identify hidden damage. Always have a certified professional do a thorough inspection annually.

What is creosote and why is it dangerous?

Creosote is a flammable byproduct of burning wood that condenses on chimney walls. It can ignite and cause a chimney fire. The risk increases with wet wood, low burn temperatures, and infrequent cleaning.

How do I know if my chimney needs cleaning?

If you see creosote buildup thicker than a quarter inch, or if you notice a strong smoky odor, it is time for a cleaning. A professional can tell you for sure during an inspection.

What is the difference between a level one and level two inspection?

A level one is a basic visual check of accessible parts. A level two includes video scanning of the flue and is recommended for real estate transactions, after a chimney fire, or if you suspect damage.

Can I use a chemical log to clean my chimney?

Chemical logs can reduce creosote buildup, but they do not replace a physical cleaning. They are not a substitute for a professional sweep and should be used only as an adjunct.