How to Turn Off Water on a Washing Machine

Turning off the water supply to your washing machine is a simple safety step that prevents flooding when you need to repair, replace, or move the machine. It also helps when you go on vacation or if you suspect a leak. The process is straightforward: locate the shut-off valves behind the machine, turn them clockwise to close, and verify the water is off.

What You’ll Need

  • Adjustable pliers or a wrench (if the valves are stiff or hard to turn by hand)
  • A towel or small bucket (to catch any water that drips from the hoses)
  • A flashlight (to see behind the machine)

Step-by-Step

  1. Unplug the washing machine (optional but recommended for safety, especially if you’ll be working near the back).
  2. Pull the machine away from the wall to access the back. If it’s in a tight space, you may need to move it carefully—slide it on a towel or use a dolly if it’s heavy.
  3. Locate the two shut-off valves on the wall behind the machine. They are usually chrome or plastic, with a red handle (hot water) and a blue handle (cold water). Each valve connects to a flexible hose that goes to the back of the washer.
  4. Turn each valve clockwise (to the right) until it stops. This closes the valve and stops the water flow. If the valve is a lever type, turn it so the handle is perpendicular to the pipe.
  5. Check that the water is off by turning on the washing machine briefly (if unplugged, plug it back in) and starting a small cycle. If no water fills, the valves are closed. Alternatively, you can listen for water running or feel the hoses for vibration.
  6. Leave the machine unplugged if you’re doing repairs or going away for a long time.

Common Mistakes

  • Turning the wrong way: Some people turn counterclockwise, which opens the valve further. Always turn clockwise to close.
  • Not turning both valves: You need to close both the hot and cold water valves, not just one.
  • Forgetting to check for leaks: After you close the valves, water may still be in the hoses. If you disconnect hoses, water will spill—have a towel ready.
  • Overtightening: If you use pliers, you can crack the valve or damage the handle. Turn until snug, not forced.

Tips

  • Label the valves if they aren’t already marked, so you know which is hot and which is cold.
  • Test the valves periodically by closing and reopening them to prevent them from seizing up.
  • If you’re going on vacation, turn off the washing machine water even if you don’t have a leak—it’s a cheap insurance policy.
  • If the valves are hard to turn, apply a little penetrating oil and let it sit before trying again.

Troubleshooting

  • Water still flows after closing valves: The valve may be faulty or not fully closed. Try turning a bit more, but if it still leaks, you may need to replace the valve. In an emergency, turn off the main water supply to the house.
  • Valves are stuck and won’t turn: Do not force them—you could break the pipe. Use a wrench with gentle pressure, or call a plumber if they won’t budge.
  • No shut-off valves behind the machine: Some homes only have a single valve for the entire laundry area. Look for a main shut-off near the water heater or where the pipes enter the house. If you can’t find it, contact your landlord or a plumber.
  • The machine is still filling even with valves closed: This could be a faulty water inlet valve inside the washer. Unplug the machine and call a repair technician.

Frequently Asked Questions

Q: Do I need to turn off the water if I’m just cleaning the machine?
A: No, you only need to turn it off if you’re disconnecting hoses or working on the water supply. For cleaning, leave it on.

Q: What if my washing machine has only one valve?
A: Some machines only use cold water, so there’s just one valve. Close it the same way.

Q: How do I know if the valve is open or closed?
A: For lever handles, the handle is parallel to the pipe when open and perpendicular when closed. For round handles, turn clockwise to close.

Q: Can I turn off the water at the main supply instead?
A: Yes, but that shuts off water to the whole house. It’s better to use the dedicated valves if they exist.

Q: What if the valve is leaking after I close it?
A: A small drip may be residual water. If it persists, the valve may need a new washer or replacement. Tighten the packing nut slightly, but if it continues, call a plumber.

Q: Do I need to turn off the water when I move the machine?
A: Yes, always close the valves before moving the washer to avoid water spillage and potential damage.