Making a handled vase lets you create a custom piece that suits your space and style, whether you’re a beginner or have some experience with clay. This guide walks you through the entire process, from preparing your materials to finishing your vase, so you can end up with a functional and beautiful object you made yourself.
What You’ll Need
- Pottery clay (about a pound or two, depending on the size of your vase)
- A rolling pin or slab roller
- A needle tool or knife for cutting
- A ruler or measuring tape
- A sponge and a small bowl of water
- A scoring tool (a fork or a serrated rib works)
- Slip (liquid clay) in a small container
- A banding wheel or a turntable (optional but helpful)
- A rib or a smooth stone for finishing
- A wire cutter (for removing the vase from the wheel or table)
- A kiln (if you plan to fire your vase) or access to one
- Glaze (if you want a colored or glossy finish)
Step-by-Step
- Prepare your clay. Wedge your clay to remove air bubbles and make it uniform. If your clay is too stiff, add a little water; if it’s too soft, let it sit out for a bit. The clay should be pliable but not sticky.
- Roll out a slab. Use a rolling pin or slab roller to flatten the clay into a slab about a quarter-inch thick. Keep the slab even by using guide sticks or a consistent pressure. The slab should be large enough to wrap around the circumference of your vase plus a little extra for overlap.
- Cut the body of the vase. Measure the height you want for your vase. Cut a rectangle from the slab with that height and a width equal to the circumference you desire (plus about an inch for the seam). Use a ruler and a needle tool for straight, clean edges.
- Form the cylinder. Gently wrap the slab around a cylindrical form (like a cardboard tube or a rolling pin) with the seam overlapping. Press the edges together lightly to hold the shape. Let it sit for a few minutes so the clay firms up slightly.
- Score and slip the seam. Unwrap the clay slightly, then use your scoring tool to roughen both edges of the seam. Apply a thin layer of slip to one edge, then press the edges together firmly. Wipe away any excess slip with a sponge, and smooth the seam with your finger or a rib.
- Create the base. Cut a circle from another slab that is slightly larger than the diameter of your cylinder. Score the bottom edge of the cylinder and the edge of the circle, apply slip, and attach the base. Use a coil of clay around the inside seam to reinforce it, then smooth it with a rib. Let the vase sit until the clay is leather-hard (firm but still slightly damp).
- Shape the neck (optional). If you want a narrower neck, gently squeeze the top of the cylinder while it’s still leather-hard, or cut and reattach a smaller cylinder. You can also flare the top by gently pressing outward from the inside. Keep the walls even to avoid cracking.
- Make the handle. Roll a coil of clay about the thickness of your thumb. The length should be enough to form an arc from the neck to the body of the vase, with a little extra. Curve the coil into a handle shape and let it firm up slightly so it holds its shape.
- Attach the handle. Decide where the handle will go—usually opposite the seam. Score both ends of the handle and the corresponding spots on the vase. Apply slip to the scored areas, then press the handle ends firmly onto the vase. Wipe away any excess slip and blend the joints with a small coil of clay or your finger to make them smooth.
- Smooth and refine. Once the handle is attached, go over the entire vase with a damp sponge to remove any fingerprints, seams, or rough spots. Use a rib to smooth the surface further. You can also add decorative elements like carved lines or texture at this stage.
- Let it dry completely. Place the vase in a dry, cool area and let it dry slowly for several days. Cover it loosely with plastic for the first day or two to slow the drying and prevent cracking. The vase is ready for firing when it feels completely dry and is lighter in color.
- Fire and glaze (if desired). Bisque fire the vase in a kiln according to your clay’s specifications. After bisque firing, you can apply glaze to the outside and inside (if you plan to hold flowers with water). Then, do a glaze firing according to the glaze instructions. If you don’t have a kiln, you can leave the vase as bisque or paint it with acrylics, but it won’t be waterproof.
Common Mistakes
- Attaching the handle too early or too late. If the clay is too soft, the handle will flop; if it’s too dry, it won’t bond well. Aim for leather-hard.
- Not scoring and slipping properly. Skipping this step leads to the handle falling off in the kiln.
- Making the walls too thick or too thin. Thick walls can crack during drying, and thin walls may collapse.
- Drying too quickly. Exposing the vase to direct sun or a hot draft causes uneven shrinkage and cracks.
- Forgetting to smooth the seam. A visible seam looks unfinished and can weaken the vase.
Tips
- Keep a spray bottle of water nearby to keep your clay moist while you work.
- Use a banding wheel to easily rotate the vase while you smooth and decorate.
- When attaching the handle, support the vase from the inside with your other hand to avoid dents.
- If the handle sags, let it firm up a bit more before attaching, or prop it up with a small piece of clay until it stiffens.
- Always test your glaze on a small sample piece first to see how it looks after firing.
Troubleshooting
- Handle cracks at the attachment point. This usually means the clay was too dry or the joint wasn’t blended well. In the leather-hard stage, you can add a bit of slip and smooth the crack. If it’s already dry, you may need to make a new handle.
- Vase collapses while shaping. The clay was too soft. Let it firm up, and if it’s beyond saving, roll it into a ball and start over.
- Vase develops a crack during drying. Cracks happen from uneven drying. Patch small cracks with slip and a bit of clay while the piece is still damp. If the crack is large, it may be best to recycle the clay.
- Handle falls off after firing. This is almost always due to poor scoring/slipping or attaching when the clay was too dry. Make sure you score well and use enough slip, and attach while the clay is leather-hard.
- Vase is wobbly. The base may be uneven. While leather-hard, you can trim the bottom with a needle tool or wire cutter to make it flat.
Frequently Asked Questions
- Can I make a handled vase without a kiln? Yes, you can air-dry the clay and paint it, but it won’t be waterproof. For a functional vase that holds water, you need a kiln to fire it.
- What type of clay is best for beginners? A mid-fire stoneware or earthenware clay is forgiving and widely available. Check with your local pottery studio or supplier for what they recommend.
- How long does it take for the vase to dry? It depends on humidity and thickness, but usually several days. Let it dry slowly and evenly to avoid cracks.
- Can I add a handle to an already thrown vase? Yes, as long as the vase is leather-hard. Score and slip the handle onto the surface, then blend the joints.
- Do I need to glaze the inside of the vase? Only if you plan to put water in it. Unglazed clay will leak, so glaze the inside for a functional vase.
- Why did my handle break off after firing? The most common cause is insufficient scoring or attaching the handle when the clay was too dry. Make sure to score both surfaces and use plenty of slip.