Button making craft is the process of creating custom pin-back buttons, typically by sandwiching a printed design between a metal shell and a clear plastic cover, then pressing the layers together with a button press machine. It is a popular hobby and small-business activity because the equipment is relatively inexpensive and the finished buttons can be used for personal expression, promotions, or fundraising.
Background of the Craft
Button making as a craft emerged in the late nineteenth century when celluloid buttons were first produced with printed designs. Early buttons were often used for political campaigns and advertising. Over time, the process became more accessible to hobbyists, and today it is common at craft fairs, schools, and community events. The basic technology has changed little: a metal shell, a printed paper or plastic design, a clear Mylar cover, and a metal back with a pin. The press applies even pressure to fold the shell edges around the back, creating a finished button.
How Button Making Works
The core of button making is the press, which uses a die set matched to a specific button size (common sizes are one inch, one-and-a-quarter inches, and two-and-a-quarter inches). The process involves several steps:
- Cut a paper or cardstock design to the correct diameter using a circle cutter.
- Place the metal shell into the lower die, with the concave side facing up.
- Lay the printed design on top of the shell, centered.
- Place the clear Mylar cover over the design.
- Position the upper die and pull the lever or press the handle to fold the shell edges around the back.
- Remove the finished button and inspect it for wrinkles or misalignment.
Most presses are manual and require physical force, but there are also electric presses for high-volume production. The pressure must be consistent to avoid bent edges or loose backs.
Choosing the Right Equipment
When starting out, you need a button press, dies, circle cutter, and supplies. The press is the main investment; manual presses are affordable and suitable for occasional use, while electric presses are faster but cost more. Die sets are specific to each button size, so if you want multiple sizes, you need separate dies. Circle cutters come in adjustable or fixed sizes; adjustable ones are more versatile. Supplies include metal shells, Mylar covers, and pin backs, which are sold in bulk. Some kits include a press, a few dies, and a starter supply of components.
Consider what you plan to make. If you are making buttons for a school club, a basic manual press is enough. If you are selling buttons at events, you might want a larger press or an electric model to speed up production. Also consider the thickness of your paper; standard copy paper works, but thicker cardstock gives a more durable button.
Common Problems and Solutions
Beginners often encounter a few issues:
- Wrinkled Mylar: usually caused by an uneven design or too much pressure. Make sure the design is flat and centered.
- Misaligned design: check that the paper is centered before pressing; use a template or guide.
- Loose back: the pin back may not be seated properly; ensure it clicks into place.
- Scratched cover: handle Mylar by the edges and avoid touching the clear area.
- Bent shell: use the correct die for the shell size and apply even pressure.
If buttons come out with a raised edge, you may be using too much pressure. If the back is loose, you may need to press again or replace the back. Always test with a scrap design before a batch.
Costs and Materials
The cost of button making varies widely. A starter kit with a manual press, one die, and a small supply of parts can be purchased for under a hundred dollars. Individual supplies—shells, Mylar, and backs—are sold in bags of a few dozen to several hundred, and the cost per button drops as you buy in bulk. Paper and printing are additional costs; you can use a home printer or take designs to a print shop. For a small hobbyist, the per-button cost is typically a few cents to a few dimes, not counting the press. For a business, the equipment pays for itself after selling a few hundred buttons.
Safety and Maintenance
Manual button presses are safe if used correctly, but they can pinch fingers. Always keep hands clear of the die area when pressing. Wear safety glasses if you are cutting many circles, as paper dust can irritate eyes. Keep the press clean and lubricate moving parts occasionally. Store dies in a dry place to prevent rust. If you use an electric press, follow the manufacturer’s safety instructions and never bypass safety guards. Buttons themselves are generally safe, but small parts can be a choking hazard for young children, so keep finished buttons away from toddlers.
Alternatives to Traditional Button Making
If you do not want to invest in a press, there are alternatives. You can buy blank buttons with a clear cover and snap them together by hand, though this is slower and less durable. Another option is to use sticker paper and stick designs onto pre-made buttons. For a temporary option, you can pin a printed circle onto a safety pin. For larger quantities, you can order custom buttons from a manufacturer, which may be cheaper than making them yourself if you need hundreds. Each method has trade-offs in cost, time, and quality.
Frequently Asked Questions
Can I use any paper for button making? Yes, but standard copy paper works best. Glossy photo paper can be used, but it may curl or smudge. Cardstock is thicker and more durable but may be harder to fold. Always test with your press.
How many buttons can I make in an hour? With a manual press, a beginner might make a few dozen per hour. With practice, you can increase speed, but an electric press is much faster for high volume.
What is the best button size for beginners? The one-and-a-quarter-inch size is common and easy to handle. Two-and-a-quarter-inch buttons are popular for pins and badges, but they require a larger press and more material.
Do I need a special printer? No, any inkjet or laser printer works. Use a high-quality setting for crisp designs. If you use a laser printer, avoid touching the printed area immediately after printing because the toner can smear.
Can I make buttons without a press? Yes, but it is difficult to get a professional finish. Hand-pressing with a clamp or a heavy book may work for a few buttons, but it is not consistent. A press is recommended for any serious making.
How do I clean a button press? Wipe the dies with a dry cloth after each session. If adhesive residue builds up, use a mild solvent and dry thoroughly. Lubricate the pivot points with a light oil occasionally.