How to Interpret Science Fair Project Results

Interpreting your science fair results means figuring out what your data actually shows and whether it supports your hypothesis. This guide walks you through organizing your data, spotting patterns, and drawing honest conclusions that will impress judges.

What You’ll Need

  • Your raw data (measurements, observations, survey responses)
  • The hypothesis you wrote before starting
  • Graph paper or a spreadsheet program
  • A calculator (for averages or percentages)
  • Your project logbook with notes about how you ran each trial

Step-by-Step

  1. Re-read your hypothesis. Write it at the top of a clean page. Your hypothesis should be a clear statement like “If I increase the amount of fertilizer, then bean plants will grow taller.” You are checking whether your data supports or contradicts that statement.
  2. Organize your raw data into a table. Put your independent variable (what you changed) in the first column and your dependent variable (what you measured) in the second. If you ran multiple trials, list each trial in its own row. Label every column with units (centimeters, seconds, number of seeds).
  3. Calculate averages for each condition. If you tested three plants with no fertilizer and three with fertilizer, add the heights from each group and divide by three. This gives you a single representative number for each condition. Show your work in your logbook so judges can follow your math.
  4. Make a graph. A bar graph works well for comparing categories (fertilizer vs. no fertilizer). A line graph works better if your independent variable is continuous, like time or temperature. Put the independent variable on the horizontal axis and the dependent variable on the vertical axis. Title the graph clearly, such as “Average Plant Height After Two Weeks.”
  5. Look for a pattern. Ask yourself: Did the dependent variable change when I changed the independent variable? Did it go up, go down, or stay roughly the same? If your averages differ by only a tiny amount, that may not be a meaningful difference—it could just be natural variation.
  6. Check for outliers. An outlier is a data point that is very different from the others. For example, if all your plants grew about the same height but one plant was much shorter, that plant might have had a problem (like a pest or uneven watering). Note the outlier in your logbook and explain what you think caused it.
  7. Compare your results to your hypothesis. If your data shows the pattern you predicted, your hypothesis is supported. If the data shows the opposite pattern, your hypothesis is not supported. If there is no clear pattern, your results are inconclusive. Any of these outcomes is valid for a science fair—the key is that you interpret them honestly.
  8. Consider possible errors. Look back at your procedure. Did you measure consistently? Did you use the same amount of water for each plant? Did the temperature in the room vary? List any factors that could have affected your results. This shows judges you understand the limitations of your experiment.
  9. Write a conclusion paragraph. Start by stating whether your hypothesis was supported, not supported, or inconclusive. Then summarize the main pattern in your data. Finally, mention one or two possible sources of error and suggest how a future experiment could improve on your design.
  10. Prepare to explain your interpretation verbally. Judges will ask questions like “Why do you think you got these results?” Practice explaining your graph and your reasoning in a few clear sentences.

Common Mistakes

  • Fudging the data. Never change or remove data points just because they don’t fit your hypothesis. Judges value honesty over a “perfect” result.
  • Confusing correlation with causation. If your plants with fertilizer grew taller, that suggests a link, but other factors (like different amounts of light) could also explain it. Be careful about claiming your independent variable caused the change unless you controlled everything else.
  • Overstating your conclusion. If your data shows a small difference, don’t say it proves your hypothesis. Say it “suggests” or “supports” the hypothesis. Science is about evidence, not certainty.
  • Ignoring trials that didn’t work. If a trial failed because you spilled a beaker, report that. You can explain it in your logbook and note that you repeated the trial if you had time.
  • Making a graph without labels. A graph with no axis labels or units is meaningless to a judge. Always label everything.

Tips

  • Use the same scale on your graph for all conditions so differences are visually honest.
  • Take photos of your setup and data collection. Visual evidence strengthens your interpretation.
  • Ask a friend or family member to read your conclusion and tell you if it makes sense. If they can follow your reasoning, a judge probably can too.
  • If your results are inconclusive, that is still a valuable outcome. You can propose a better experiment for next time—that shows scientific thinking.
  • Keep your logbook updated with dates and notes. Judges often look at the logbook to see how you handled unexpected events.

Troubleshooting

My data is all over the place with no pattern. First, check your logbook for any notes about equipment problems or inconsistent procedures. If you find an error, say so in your conclusion. If you don’t find an error, your experiment may have too many uncontrolled variables. Explain that in your conclusion and suggest controlling more variables next time.

My results directly contradict my hypothesis. This is not a failure. It means your hypothesis was wrong, which is a legitimate scientific finding. Write your conclusion to say the data did not support your hypothesis, and offer a possible reason why. For example, if you predicted plants would grow taller with more fertilizer but they didn’t, maybe the fertilizer concentration was too high and harmed the plants.

I lost some of my data. If you have partial data, use what you have and clearly state in your conclusion that some trials were lost. Do not invent replacement numbers. Judges appreciate transparency.

My averages are very close together. That means your independent variable likely had little or no effect. Say that in your conclusion. You can also note that a larger sample size might reveal a smaller effect that your experiment couldn’t detect.

I don’t know how to make a graph. Use graph paper and a ruler if you don’t have spreadsheet software. Plot each data point carefully, then draw a bar or line. If you do use software, make sure the labels are readable and the scale doesn’t exaggerate differences.

Frequently Asked Questions

What if my hypothesis is not supported? Will I get a bad grade? No. Science fair judges evaluate how well you followed the scientific method, not whether your hypothesis was correct. A well-conducted experiment with a negative result is often more impressive than a sloppy experiment that “works.”

How many trials do I need? More trials give more reliable results, but quality matters more than quantity. Three trials per condition is a common minimum for school projects. If you can only do two, say so in your limitations.

What is the difference between results and conclusion? Results are the raw data and what you observed (the table and graph). Conclusion is what you interpret those results to mean—whether they support your hypothesis and why. Both sections are important on your display board.

Can I include photos in my results section? Yes, photos of your experiment in action can be very helpful, especially if they show a visible difference between conditions. Label each photo clearly and reference it in your written results.

What if my data shows a pattern but I don’t know why it happened? That’s fine. In your conclusion, describe the pattern and then say something like “The reason for this pattern is unclear and would require further investigation.” That is an honest and scientifically mature statement.

Should I include every single data point or just averages? Include both. Show your full data table (or a summary table if you have many points) and then show the averages on your graph. This lets judges see your raw work and your interpretation.