Installing Vinyl Siding Over Brick: What to Know

Yes, you can install vinyl siding directly over a brick house, and it is a common renovation practice. However, the success depends on proper preparation, moisture management, and attaching furring strips correctly to the brick.

Why Consider Siding Over Brick

Brick is durable, but it is not immune to problems. Over time, mortar can crack, bricks can spall from freeze-thaw cycles, and the wall can let in water. Vinyl siding offers a fresh look without the cost and mess of removing brick. It also adds an insulation layer if you use insulated vinyl, which can improve energy efficiency. Many homeowners choose this route because it is faster than demolition and avoids the expense of hauling away tons of old brick.

How It Works: The Furring Strip System

The key to installing vinyl siding over brick is creating a flat, nailable surface. You cannot nail directly into brick. Instead, you attach vertical furring strips—usually treated wood or metal—to the brick wall. These strips are spaced about a foot apart and are secured with masonry screws or nails driven into the mortar joints. The strips create a gap between the brick and the siding, which allows moisture to escape and provides a surface for the vinyl J-channels and panels.

Here is a simplified sequence:

  • Inspect the brick for loose or damaged areas and repair them.
  • Apply a water-resistant barrier or house wrap over the brick if local code requires it.
  • Attach furring strips vertically, leveling them as you go.
  • Install starter strips and corner posts.
  • Hang the vinyl panels, leaving a small gap at the top for expansion.

Moisture and Ventilation: The Biggest Concern

Brick is porous and can absorb water. If you trap that moisture behind vinyl siding, you risk rot, mold, and structural damage. The furring strips create a drainage plane, but you must ensure there is a way for water to escape. Use a vented soffit or leave weep holes at the bottom of the siding. Some building codes require a rain screen system—essentially a gap that allows air to circulate. Check your local building department for specific requirements.

Choosing the Right Materials

Not all furring strips are equal. Pressure-treated wood resists rot but can warp. Metal furring channels are more expensive but last longer. For the siding itself, you have two main choices: standard vinyl and insulated vinyl. Insulated vinyl has foam backing that adds R-value and makes the wall feel more solid, but it costs more. Also, consider the color—darker vinyl absorbs heat and can warp in very hot climates. Lighter colors reflect heat and are safer for south-facing walls.

Common Problems and How to Avoid Them

One frequent mistake is not accounting for the added thickness of furring strips and siding around windows and doors. You may need to extend window jambs or add trim pieces. Another issue is fastening the furring strips too tightly, which can crack the brick. Use masonry anchors that are designed for brick, not drywall screws. Finally, be aware that vinyl expands and contracts with temperature changes. Nail it loosely—do not drive the nails flush. Leave a small gap between the nail head and the panel to allow movement.

Cost and Time Considerations

Installing siding over brick costs less than removing the brick first, but it is not cheap. You will pay for materials, labor, and possibly additional insulation. The process takes several days to a couple of weeks, depending on the size of your house and the complexity of the roofline. If you hire a contractor, get multiple quotes and ask for references. If you do it yourself, budget extra time for leveling the furring strips—it is the most tedious part.

Alternatives to Vinyl Over Brick

Vinyl is not your only option. You could also use engineered wood siding, fiber cement, or even stucco over brick. Each has pros and cons. Fiber cement is more durable and fire-resistant but heavier and harder to install. Engineered wood looks more natural but requires painting. Stucco can be applied directly to brick but may crack if the house settles. Compare warranties and maintenance requirements before deciding.

Frequently Asked Questions

Will vinyl siding hide brick imperfections? Yes, but only if the furring strips are level. If the brick is very uneven, you may need to shim the strips or use a thicker furring material.

Do I need to remove the brick first? No, you can leave it in place. Removing brick is only necessary if the wall is structurally unsound or if you want to change the footprint of the house.

Can I install vinyl siding over brick myself? Yes, if you have basic carpentry skills and tools. The hardest part is drilling into brick and getting the furring strips perfectly vertical. Watch a few tutorials and rent a hammer drill.

Will the siding make my house warmer? Standard vinyl adds little insulation, but insulated vinyl can add a small R-value. The biggest benefit is reducing air leaks around windows and doors.

How long will the siding last? Quality vinyl siding can last for decades, but it can crack from impact or warp from extreme heat. Follow the manufacturer’s care instructions.

Does the brick need to be sealed before siding? Not usually. In fact, sealing brick can trap moisture. It is better to let the brick breathe and rely on the drainage gap.