Winterizing your outdoor furniture protects it from rain, snow, ice, and UV damage so it lasts for many seasons. Without proper preparation, wood can warp and crack, metal can rust, and cushions can grow mold or mildew. This guide covers everything you need to do, from cleaning and covering to storing, with practical steps and common pitfalls to avoid.
What You’ll Need
- Mild dish soap or a specialized outdoor furniture cleaner
- Soft-bristle brush or sponge
- Bucket and garden hose
- Clean, dry towels or microfiber cloths
- Furniture covers (waterproof and breathable) or heavy-duty tarps
- Bungee cords or rope (for securing covers)
- Wood sealant or teak oil (for wood furniture)
- Rust-resistant primer and paint (for metal furniture with scratches)
- Fabric protector spray (for cushions and umbrellas)
- Storage space, such as a shed, garage, or basement
- Sandpaper (medium and fine grit) for wood touch-ups
- Plastic or rubber feet caps (to keep furniture off wet ground)
Step-by-Step
- Check the weather forecast. Choose a dry, mild day for this task. You need time for furniture to dry completely before covering or storing, so avoid days with rain or high humidity.
- Remove all cushions, pillows, and fabric parts. Take them indoors and wash them according to the manufacturer’s instructions. Most cushion covers are removable and machine washable on a gentle cycle with mild detergent. Air-dry them completely—this can take a day or two. If the foam inserts are removable, take them out and let them air out too. Never store damp cushions, as they will develop mold.
- Clean the furniture frames. Mix a small amount of mild dish soap with warm water in a bucket. Use a soft-bristle brush or sponge to scrub the frames, removing dirt, pollen, bird droppings, and any mildew spots. Rinse thoroughly with a garden hose. For stubborn mildew, use a solution of one part bleach to several parts water (check the furniture’s care instructions first—bleach can damage some finishes).
- Dry everything completely. Use clean towels to wipe down the frames, then let them air-dry for several hours. Pay special attention to crevices, joints, and under the arms where water can hide. This step is crucial because any trapped moisture will freeze and expand, causing cracks or rust during winter.
- Inspect for damage. Look for loose screws, wobbly legs, rust spots, peeling paint, or splinters. Tighten any hardware with a wrench or screwdriver. For wood, sand down rough areas with fine-grit sandpaper. For metal, sand off rust and apply a rust-inhibiting primer and paint if needed. Fixing small issues now prevents them from worsening during winter.
- Apply protective treatments. For wood furniture (teak, cedar, eucalyptus), apply a suitable wood sealant or teak oil after cleaning and drying. This helps repel moisture and prevents cracking. For metal furniture, consider a coat of automotive wax or a specialized metal protectant to add a barrier against moisture. For plastic or resin furniture, a UV protectant spray can prevent fading and brittleness.
- Treat cushions and fabric. Once cushions are completely dry, spray them with a fabric protector designed for outdoor use. This adds a water-repellent layer that resists stains and moisture. Do this outdoors or in a well-ventilated area, and let them dry fully before storing.
- Decide: store or cover? The best option is to store furniture indoors—in a shed, garage, basement, or even a spare room. If indoor storage isn’t possible, you’ll need to cover it outdoors. For outdoor covering, use fitted, waterproof, and breathable covers. If using a tarp, ensure it’s secured tightly but still allows some airflow to prevent condensation.
- Store cushions separately. Even if you cover the frames, bring cushions indoors. Store them in a dry place, ideally in a breathable storage bag or on a shelf. Stacking them flat helps maintain their shape. Avoid storing in plastic bags, which trap moisture and encourage mildew.
- Cover the furniture properly. If leaving furniture outside, place covers over the frames. Make sure the covers are large enough to cover the entire piece, including the legs. Secure them with bungee cords or rope to prevent wind from blowing them off. For tables, turn them upside down if possible to prevent water pooling on the surface. For chairs, stack them if they’re stackable, then cover the stack.
- Lift furniture off the ground. Place plastic or rubber feet caps under the legs, or set furniture on wooden pallets or bricks. This keeps the legs from sitting in water or ice, which can cause rot or rust over time.
- Maintain during winter. After heavy snow, gently brush off snow from covers to prevent excess weight from damaging the furniture or covers. If you get a warm, dry day, remove covers briefly to let the furniture air out and check for any moisture buildup. Re-tighten covers if they’ve loosened.
Common Mistakes
- Skipping the cleaning step. Dirt and grime hold moisture against the furniture, which accelerates damage. Always clean before covering or storing.
- Covering damp furniture. This is the most common cause of mold and mildew. If you’re not sure it’s dry, wait another hour.
- Using non-breathable covers. Plastic tarps trap condensation, which is worse than leaving furniture uncovered in some cases. Use breathable, waterproof covers designed for outdoor furniture.
- Forgetting to secure covers. A loose cover can blow off, leaving furniture exposed. Always tie down covers with cords or use covers with drawstrings.
- Storing cushions in plastic bins. This traps moisture and leads to mildew. Use breathable fabric storage bags or just place them on a shelf.
- Ignoring small rust spots. A tiny rust spot will spread quickly in winter. Treat it as soon as you spot it.
- Leaving furniture on grass or dirt. Moisture from the ground seeps into the legs, causing rot or rust. Always lift furniture off the ground.
Tips
- Invest in quality covers. Good covers are worth the cost. Look for ones with UV protection, reinforced seams, and ventilation flaps.
- Use a fabric protector on umbrellas too. Clean and treat your patio umbrella before storing it. Close it and cover it or store it indoors.
- Disassemble furniture if possible. Remove table leaves, fold chairs, and detach umbrella bases. This makes storage easier and reduces stress on joints.
- Keep a maintenance kit handy. Store a small container of touch-up paint, wood oil, and a rust remover with your outdoor furniture supplies so you can fix issues in spring.
- Consider a storage rack. If you have limited floor space, use wall-mounted racks or ceiling hooks to hang chairs or store cushions vertically.
- Check your warranty. Some manufacturers require winterization to keep the warranty valid. Read the care instructions that came with your furniture.
Troubleshooting
What if my furniture is already moldy? Clean it with a solution of mild soap and water, then apply a mildew remover (test on a small area first). Rinse thoroughly and dry completely. If the mold has penetrated the finish, you may need to sand and refinish wood, or repaint metal. For cushions, if mold is deep in the foam, it’s often best to replace them.
What if my covers don’t fit properly? If covers are too small, they won’t protect fully. Consider buying larger covers or using a tarp with bungee cords. If covers are too large, they can pool water—use a center pole or prop to create a slope so water runs off.
What if I have no indoor storage? You can still protect furniture outdoors. Use high-quality covers, elevate the furniture, and consider wrapping the entire piece in a breathable tarp. For extra protection, place a layer of bubble wrap between the furniture and the cover (but ensure airflow).
What if I missed the fall window and it’s already snowing? It’s never too late. On a dry day, brush off snow, wipe down what you can, and cover the furniture. Even a quick cover will help. If the furniture is already wet, let it dry as much as possible before covering, and check it periodically during winter to air it out.
What if my wood furniture has cracked? Small cracks can be filled with wood filler, sanded, and sealed. Larger cracks may require professional repair. If the furniture is severely damaged, it might be time to replace it.
Frequently Asked Questions
Do I really need to cover furniture if I have a patio roof? Yes, even under a roof, furniture is exposed to moisture, dust, and temperature changes. Covering adds protection and reduces wear.
Can I leave cushions outside if they’re covered? It’s not recommended. Even with covers, condensation can form and cause mildew. Bring cushions indoors if possible.
How often should I replace furniture covers? Quality covers typically last several years, but if they start to tear, fade, or no longer repel water, replace them.
Is it okay to use a regular tarp as a cover? Yes, but only if you create ventilation. Prop up the tarp so it doesn’t touch the furniture directly, and secure it well. A breathable furniture cover is better.
Should I treat metal furniture with oil? No, oil can attract dust. Use a wax or a silicone-based protectant instead.
What’s the best way to store cushions? Clean and dry them, then store in a breathable bag or on a shelf in a dry area. Avoid stacking heavy items on top to prevent compression.
Can I use a pressure washer to clean furniture? Yes, but use a low-pressure setting and keep the nozzle at a distance to avoid damaging finishes. For wood, use a gentler approach.
Winterizing your outdoor furniture takes a few hours, but it saves you money and hassle in the long run. By cleaning, protecting, and covering properly, you’ll enjoy your patio set for many more seasons.