Wildlife Garden Part Five: Water Features & Ponds

Adding water is the single most effective way to boost the number and variety of wildlife in your garden. A pond, even a small one, provides drinking water, breeding habitat for amphibians and insects, and a hunting ground for birds and bats. This part of the series focuses on creating a simple, safe, and self-sustaining water feature that integrates with the rest of your wildlife garden.

What You’ll Need

  • Flexible pond liner (EPDM rubber or PVC) or a pre-formed rigid pond shell
  • Sand or old carpet/underlay to protect the liner
  • Spade and shovel for digging
  • Level (spirit level)
  • Ruler or tape measure
  • Water source (hose or watering can)
  • Native aquatic plants (marginal, oxygenating, and floating)
  • Rocks or logs for the edges
  • Optional: small pump or solar fountain (but not essential)

Step-by-Step

  1. Choose the location. Pick a spot that gets at least a few hours of sunlight a day, but not full, scorching sun all day. Avoid areas directly under large trees, as falling leaves will clog the pond and shade it too much. Also, consider visibility from your house – you’ll enjoy it more if you can see it.
  2. Decide on size and shape. For a wildlife pond, irregular, natural shapes (like a kidney or bean) are better than perfect circles. Aim for a size that fits your garden – a pond that is a few feet across is fine for most gardens. The depth should vary: a shallow area (a few inches) for birds to bathe, and a deeper area (at least a couple of feet) so it doesn’t freeze solid in winter and provides refuge for frogs and newts.
  3. Mark out the shape. Use a rope, hose, or sand to outline the pond on the ground. This gives you a visual guide before you start digging.
  4. Dig the pond. Dig out the entire area to the depth of the shallow shelf first (about a few inches). Then dig the deeper central area, leaving a ledge or shelf around the edge for marginal plants. Make the sides fairly steep (almost vertical) so that animals can’t easily get trapped, but ensure there’s a gentle slope at one end so hedgehogs and other small creatures can climb out if they fall in.
  5. Remove sharp stones and roots. Once dug, go over the entire surface, removing any sharp stones, roots, or debris. These could puncture the liner later.
  6. Line the hole. Spread a layer of sand or old carpet over the entire hole to cushion the liner. Then lay the pond liner over the hole, allowing plenty of slack (don’t stretch it tight). Press it down into the contours, making sure it reaches into all the corners.
  7. Add water slowly. Begin filling the pond with water. As the water fills, the liner will be pushed against the sides – adjust it gently to remove wrinkles and ensure it sits snugly. Fill it to the top.
  8. Trim the liner. Once full, trim the excess liner, leaving a border of about a foot all around. You’ll cover this with rocks, turf, or soil later.
  9. Add plants. Plant native aquatic plants in baskets or directly into the shallow shelves. Good choices include water mint, marsh marigold, and water forget-me-not for the margins, and oxygenating plants like hornwort or water starwort for the deeper water. Add a floating plant like frogbit to provide shade and shelter.
  10. Finish the edges. Cover the exposed liner with large stones, logs, or turf. Make sure the stones overhang slightly to create hiding places for wildlife. Leave a gentle slope at one end using stones and soil so that animals can easily access the water.
  11. Wait and observe. It may take a few weeks for the pond to establish a natural balance. Don’t change the water, and avoid adding fish – they will eat the insects and tadpoles. Within a few months, you should see frogs, newts, dragonflies, and birds visiting.

Common Mistakes

  • Adding fish. Fish are the biggest mistake in a wildlife pond. They eat insect larvae, tadpoles, and eggs, and they stir up the water, making it murky. A wildlife pond is best without any fish.
  • Placing the pond in full shade. Too much shade means fewer plants and less oxygen. Aim for a spot with a good balance of sun and shade.
  • Forgetting a shallow exit. Without a gentle slope or ramp, hedgehogs, voles, and even birds can drown. Always provide an easy escape route.
  • Using tap water that is too cold. Fill the pond with water that is at room temperature, not ice-cold from the tap, to avoid shocking any wildlife that may already be present (though it’s best to fill it before adding plants).
  • Planting invasive species. Some pond plants, like parrot’s feather, can take over and choke the pond. Stick to native, non-invasive species.

Tips

  • Use rainwater. If possible, fill the pond with rainwater from a butt. It’s free of the chemicals found in tap water and is better for wildlife.
  • Add a log pile nearby. A small pile of logs or stones next to the pond provides shelter for amphibians and insects that live near water.
  • Let the pond go wild. Don’t be too tidy. Leave some overhanging vegetation and let the edges grow a bit wild. This creates cover and makes wildlife feel safe.
  • Consider a small fountain. A solar-powered fountain can help oxygenate the water and prevent it from becoming stagnant, but it’s not essential. If you do use one, keep it on a timer so it doesn’t run all night, which can disturb nocturnal animals.
  • Be patient. It can take a full season for a new pond to become established. Don’t be discouraged if it looks a bit bare at first – it will fill in.

Troubleshooting

  • The water is green (algae bloom). This is normal in a new pond. It usually clears up on its own as the plants establish and compete for nutrients. Avoid changing the water – that makes it worse. Add more oxygenating plants and wait.
  • The pond leaks. If the water level drops noticeably, check for punctures in the liner. Small leaks can be patched with a repair kit. If it’s a large leak, you may need to drain and re-line.
  • Mosquitoes breed in the water. This is usually only a problem if the water is stagnant and there are no predators. Adding a small pump or fountain will keep the water moving, and dragonflies and other insects will soon move in and control the larvae.
  • Leaves keep falling in. If your pond is under a tree, consider installing a net over the pond in autumn to catch leaves, or simply skim them off regularly. Too many leaves can rot and deplete oxygen.
  • No frogs or newts appear. It can take time for amphibians to find your pond. Be patient, and make sure there are no barriers like fences that block their path. You can also ask a neighbor with a pond if you can have some of their pondweed, as it may contain eggs.

Frequently Asked Questions

Q: How deep should a wildlife pond be?
A: It should have a shallow edge (a few inches) for birds and a deeper area (at least a couple of feet) so it doesn’t freeze solid in winter. This allows amphibians to hibernate at the bottom.

Q: Can I use a pre-formed pond shell instead of a liner?
A: Yes, pre-formed shells are easier to install, but they are often smaller and have steeper sides, which can be harder for wildlife to access. If you use one, make sure to add a ramp or slope of stones for entry and exit.

Q: Should I put a pump in my wildlife pond?
A: Not necessarily. A pump can keep the water clear and oxygenated, but it can also suck in small creatures. If you use one, keep it on a low setting and place it in a way that doesn’t create a strong current. A solar fountain is a good compromise.

Q: What should I do with the pond in winter?
A>Leave it alone! Don’t break the ice if it freezes – that can shock the animals. If you want to help, float a ball or a piece of wood on the surface to keep a small hole open for gas exchange. Remove any fallen leaves regularly.

Q: Can I add fish to my wildlife pond?
A: No, it’s best not to. Fish eat insect larvae and tadpoles, and they stir up the sediment, making the water cloudy. A wildlife pond is designed for insects and amphibians, not fish.

Q: How long will it take for wildlife to find the pond?
A: It can take anywhere from a few weeks to a few months. Birds may find it quickly, but amphibians and insects may take longer. Patience is key – once the plants establish, the wildlife will follow.