DIY deck skirting is absolutely doable for most homeowners, and the best approach depends on your budget, the look you want, and how much ventilation your deck needs. You can choose from simple lattice panels, solid wood, composite materials, or even faux stone panels, each with its own installation method and level of difficulty.
Why Deck Skirting Matters
Deck skirting is the material that closes off the space between the bottom of your deck and the ground. It’s not just for looks—it serves several practical purposes. It keeps animals from nesting under your deck, hides stored items or ugly concrete footings, and can improve the overall appearance of your backyard. Skirting also helps with airflow, which is critical for preventing moisture buildup and rot in the deck structure. Without proper ventilation, the area under your deck can become a damp, musty environment that attracts pests and accelerates wood decay.
Choosing the Right Material
The material you choose will affect both the look and the longevity of your skirting. Here are the most common options:
- Wood lattice: The classic choice. It’s inexpensive, easy to cut, and provides good ventilation. Pressure-treated pine or cedar are common. The downside is that it can warp or rot over time, especially if it touches the ground.
- Solid wood boards: This gives a clean, modern look and can be painted or stained to match your deck. It’s more expensive than lattice and requires careful spacing for ventilation. Use rot-resistant wood like cedar or redwood if you go this route.
- Composite or PVC panels: These are low-maintenance and won’t rot, warp, or splinter. They come in various colors and textures, including wood-look finishes. They cost more upfront but save you time and money on maintenance later.
- Faux stone or brick panels: These are lightweight panels that mimic the look of masonry. They’re great for a high-end appearance and are usually made of polyurethane or fiberglass. They’re more expensive and can be tricky to cut, but they’re very durable.
- Metal sheets or corrugated panels: A more industrial look, often used for sheds or modern homes. They’re durable and low-maintenance but may not be the best fit for a traditional backyard deck.
Ventilation and Access: The Two Rules
Before you start building, you need to plan for two things: airflow and access. Skirting that blocks all airflow can trap moisture, which leads to rot and mold. You should leave gaps or install vents, especially if your deck is low to the ground. A good rule of thumb is to have at least a few inches of clearance between the skirting and the ground, or to use lattice or perforated panels. You also need a way to get under the deck for maintenance or to retrieve something. Consider building a small access door or a removable panel. Many people use a simple hinged gate or a section of skirting that can be lifted out.
Step-by-Step Installation Basics
While the exact steps vary by material, the general process is similar. Here’s a basic outline for a typical wood or composite skirting project:
- Measure the perimeter: Measure the distance around your deck, and note the height of the gap from the ground to the bottom of the deck frame. You’ll need these numbers to buy materials.
- Install horizontal rails: Attach pressure-treated 2x4s or 2x6s between the deck posts, running parallel to the ground. These rails will support your skirting panels. Make sure they are level.
- Cut your panels: Cut your chosen material to fit between the posts and rails. For lattice, you can cut it with a circular saw or a handsaw. For composite panels, use a circular saw with a fine-tooth blade.
- Attach the panels: Screw or nail the panels to the rails. For lattice, use galvanized nails or screws. For composite, use screws designed for that material to prevent cracking.
- Add trim: Cover the top edge of the skirting with a piece of trim or a 1×4 board to give it a finished look and hide any rough cuts.
- Build an access door: If you want a door, frame out a rectangular opening with 2x4s, then attach a small panel on hinges. Or, make a removable section that is held in place with a couple of screws.
Common Mistakes and How to Avoid Them
One of the most common mistakes is skipping the pressure-treated wood for anything that touches the ground. Untreated wood will rot quickly. Another mistake is not leaving a gap between the skirting and the soil. If the skirting sits directly on the ground, it will wick moisture and rot. Always leave at least a couple of inches of clearance. Also, many people forget to consider the slope of their yard. If your ground is uneven, you’ll need to cut your panels at an angle or use a stepped design. Finally, don’t nail skirting directly to the deck posts without a rail system—it will look sloppy and may not be secure.
Cost and Time Estimates
The cost of DIY deck skirting varies widely based on material and deck size. Lattice is the cheapest, often costing just a few dollars per square foot. Solid wood and composite are more expensive, and faux stone panels are the priciest. You’ll also need to buy screws, nails, and possibly trim. The time it takes depends on your skill level and the complexity of your deck. A simple lattice skirt on a small deck can be done in a weekend, while a larger deck with custom panels and a door might take a couple of weekends. Renting a nail gun or using a drill with a screwdriver bit can speed things up.
Alternatives to Traditional Skirting
If you don’t want to build skirting from scratch, there are alternatives. You could use pre-made skirting panels that are sold at home improvement stores—these are often just lattice or vinyl panels that you cut to size. Another option is to use a decorative metal screen or even a living skirting made of plants, like a row of shrubs or ornamental grasses, though this won’t block animals as well. Some people simply leave the space open and paint the concrete footings a dark color to make them less noticeable. For a finished look without the work, you could hire a professional, but that will cost more.
Frequently Asked Questions
Do I need to vent my deck skirting?
Yes, ventilation is important. Without it, moisture builds up under the deck, which can cause wood rot and attract termites. Lattice or panels with gaps are good. If you use solid panels, install vents every few feet.
Can I use regular wood for skirting?
You can, but it’s not recommended for pieces that touch the ground or are exposed to moisture. Use pressure-treated wood for any part that may come into contact with soil, and consider cedar or redwood for above-ground parts.
How do I make a removable access panel?
The easiest way is to build a rectangular frame and attach a piece of skirting to it. Then, secure the panel with a couple of screws or a latch. Alternatively, you can use hinges on one side and a latch on the other.
What is the best material for a low deck?
For a low deck (where the gap is only a few inches), you might not have room for skirting at all. In that case, you could use a gravel or stone skirt, or just landscape around the base. If you have a few inches, lattice is a good choice because it’s flexible and can be cut to fit tight spaces.
Can I paint or stain my skirting?
Yes, you can paint or stain most wood skirting, and you can paint composite panels with a special primer and paint. Be sure to use exterior-grade products. If you use pressure-treated wood, wait for it to dry out before painting.
Will skirting keep animals out?
Skirting will deter most animals, but it’s not a guarantee. Some animals, like rabbits or skunks, can dig under the skirting. To prevent digging, you can bury the bottom edge a few inches into the ground or attach a wire mesh to the bottom of the skirting.