Arborvitae Turning Brown After Planting? Fixes

Yes, arborvitae turning brown after planting is usually a sign of transplant stress, and in most cases the plant will recover if you address the cause quickly. The browning can come from several distinct issues—most commonly underwatering, overwatering, or a condition called “winter burn”—so the first step is to figure out which one you’re dealing with.

Why Newly Planted Arborvitae Turn Brown

Arborvitae are evergreen conifers, meaning they keep their needles year-round. When you plant one, the roots are suddenly cut off from the soil they grew in, and the plant has to regrow a new root system in a new location. During this time, the roots can’t take up water as efficiently as they will later, but the needles still lose water through transpiration. If the roots can’t keep up with the water loss, the needles dry out and turn brown. This is called transplant shock.

There are three main causes of browning after planting:

  • Underwatering: The most common cause, especially in the first few weeks. The root ball dries out faster than the surrounding soil, and the plant can’t get enough moisture.
  • Overwatering: Too much water suffocates the roots, preventing them from absorbing oxygen. The roots rot, and the needles turn brown as a result.
  • Winter burn: If you planted in late fall, the roots may not have established before the ground froze. In winter, the needles continue to lose water, but the frozen soil can’t supply it, leading to browning on the windward side.

How to Diagnose the Problem

Before you change anything, look closely at the pattern of browning and check the soil moisture.

  • Check the soil: Stick your finger a few inches into the soil near the root ball. If it feels bone dry, underwatering is likely. If it feels soggy or smells musty, overwatering is the problem.
  • Look at the pattern: If the browning is on the side facing the sun or the wind, it’s likely winter burn or wind desiccation. If it’s all over, it’s probably a root issue.
  • Feel the needles: If the brown needles are brittle and fall off easily, the plant is stressed. If they’re still flexible but discolored, there’s still hope.

How to Fix Browning After Planting

Once you’ve identified the likely cause, take these steps:

  1. For underwatering: Water deeply and slowly. Use a soaker hose or a slow trickle from a garden hose, and let the water soak in for a couple of hours. Water every couple of days for the first few weeks, then gradually reduce frequency as the plant establishes.
  2. For overwatering: Stop watering immediately. Let the soil dry out. If the plant is in a low spot that collects water, you may need to dig a small trench to redirect water away. If the roots have rotted, you may need to replant in better-draining soil.
  3. For winter burn: Prune off the brown branches in early spring. The plant may push out new growth from the base. To prevent future winter burn, water well in late fall before the ground freezes, and consider wrapping the plant in burlap or installing a windbreak.

Preventing Browning in New Plantings

The best way to deal with browning is to prevent it. Here are the key steps to follow when planting:

  • Plant at the right time: Early spring or early fall is best, so the plant has time to establish roots before extreme heat or cold.
  • Dig a proper hole: The hole should be about twice as wide as the root ball but no deeper. The top of the root ball should be level with the surrounding soil.
  • Water thoroughly at planting: Give the plant a deep watering right after planting to settle the soil and eliminate air pockets.
  • Mulch: Apply a layer of organic mulch (like wood chips) a few inches thick around the base, but keep it a few inches away from the trunk. Mulch helps retain soil moisture and moderates soil temperature.
  • Water regularly for the first year: Newly planted arborvitae need consistent moisture for at least the first growing season. A good rule is to water deeply once a week if there’s no rain.

Common Mistakes That Cause Browning

Many homeowners make these mistakes without realizing they’re harming the plant:

  • Planting too deep: If the root ball is buried below the soil line, the trunk can rot, and the plant will decline. Always keep the top of the root ball slightly above the soil level.
  • Not watering enough in the first year: Even if you water well for the first few weeks, you need to keep it up for the whole first year. Many people stop watering after a month, and the plant suffers.
  • Fertilizing too soon: Fertilizer can burn the tender new roots. Wait until the plant has established, usually a year after planting, before fertilizing.
  • Planting in a windy spot: Wind can dry out the needles quickly. If you must plant in a windy area, provide a windbreak.

Will a Brown Arborvitae Come Back?

It depends on how much of the plant is brown. If only the tips of the branches are brown, the plant will likely recover, and the brown parts will drop off as new growth appears. If entire branches are brown and brittle, those branches are dead and won’t regrow. However, arborvitae can sometimes push out new growth from the base or from living branches, so don’t give up too soon. Scratch the bark with your fingernail: if the tissue underneath is green, the branch is still alive. If it’s brown and dry, that branch is dead.

If more than half the plant is brown, it may not survive. But it’s worth waiting until early summer to see if any new growth appears. If the plant is completely brown and the roots are dead, it’s time to replace it.

Frequently Asked Questions

Q: How long does transplant shock last in arborvitae?
Transplant shock can last from a few weeks to a few months, depending on the size of the plant and how well it’s cared for. Small plants recover faster than large ones. Keep watering consistently, and you should see new growth within a few weeks in spring or summer.

Q: Can I prune off the brown parts?
Yes, you can prune off dead branches, but be careful not to cut into the green wood. Use clean, sharp pruners, and make cuts just above a healthy bud or branch junction. Wait until late winter or early spring to prune, as this minimizes stress.

Q: Should I fertilize a struggling arborvitae?
No. Fertilizing a stressed plant can do more harm than good. Wait until the plant shows signs of new growth, then fertilize lightly with a balanced fertilizer. Always follow the product instructions, and water well after applying.

Q: How often should I water a newly planted arborvitae?
For the first few weeks, water every couple of days, then gradually reduce to once a week. The key is to keep the soil consistently moist but not waterlogged. Check the soil moisture regularly, and adjust based on weather conditions.

Q: Can I plant arborvitae in the summer?
It’s possible, but it’s risky. Summer heat and dry conditions make it hard for the plant to establish. If you must plant in summer, water very frequently and provide shade for the first few weeks. Early spring or early fall is much better.

Summary

Arborvitae turning brown after planting is a common issue, but it’s often fixable. The key is to diagnose the cause—underwatering, overwatering, or winter burn—and take corrective action. Proper planting technique, consistent watering, and a little patience will give your arborvitae the best chance to thrive. If the browning is extensive, wait until spring to see if new growth appears before deciding to replace the plant.